Pass4sure > Cisco > CCDE > Exam 352-001 ADVDESIGN : 352-001 ExamQuestions and Answers : 240 Q&As Updated: November 13th , 2008 Price: $199.99 $125.99 Product DescriptionExam Number/Code: 352-001
Exam Name: ADVDESIGN

“ADVDESIGN”, also known as 352-001 exam, is a Cisco certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 240 Q&As to your 352-001 Exam preparation. In the 352-001 exam resources, you will cover every field and category in CCDE helping to ready you for your successful Cisco Certification.

Free Demo DownloadPass4sure offers free demo for 352-001 exam (ADVDESIGN). You can check out the interface, question quality and usability of our practice exams before you decide to buy it.

Pass4sure Engine Features Quality and Value for the 352-001 ExamPass4sure Practice Exams for Cisco CCDE 352-001 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your 352-001 ExamIf you do not pass the CCDE 352-001 exam (ADVDESIGN) on your first attempt using our pass4sure testing engine, we will give you a FULL REFUND of your purchasing fee.
Downloadable, Interactive 352-001 Testing enginesOur ADVDESIGN Exam Preparation Material provides you everything you will need to take a CCDE certification examination. Details are researched and produced by Cisco Certification Experts who are constantly using industry experience to produce precise, and logical.

Comprehensive questions with high quality about 352-001 exam 352-001 exam questions accompanied by exhibits Verified Answers Researched by Industry Experts and almost 100% correct 352-001 exam questions updated on regular basis Same type as the certification exams, 352-001 exam preparation is in multiple-choice questions (MCQs). Tested by multiple times before publishing Try free 352-001 exam demo before you decide to buy it in Pass4sure.com Feedbacks “Hi friends

The exam of 352-001 is finished. Nearly a month of preparation is end. My score is 956/1000.

The demand of CCDE for mastering the knowledge points is very strict, the candidates must know some major technologies such as routing, security, voice and wireless. So I think CCDE is very valuable, it is a good choice.

I spent about a month on preparations for the exam. The study materials I used are Study Guide and study resources collected from forum, the key is to do P4S tests which make you know the exam more clearly. So, I think the exam is very easy.

I hope the information I give can help you!

Freeman
” — Freeman (Nov, 17 2008) “Hi all

I passed the CCDE exam last week, my score is 972/1000.

Passing the exam makes me very happy. Of course, the most important thing is that the score makes me very satisfied.

This confirms my long-term effort.

The study materials I used are CCDP Study Guide and the P4S tests

Before the exam, I used the P4S tests to examine how well I master the knowledge points.

So the result is within my expectations.

Good luck and wish you passing the exam successfully!

Christie
” — Christie (Nov, 15 2008) “Hi guys

I passed the exam of 352-001 today, my score is 988/1000.

The exam is relatively easy.

I have passed the exams of CCDA and CCDP before taking the CCDE exam.

I spent three weeks on preparation for the exam.

The study material I used is the study guide and the P4S tests.

Most time is spent on tests, thus I can prepare the exam more efficiently.

That’s all.

Good luck!
I was just wondering if anyone had taken the CCDE (352-001 ADVDESIGN) written exam yet?

If so what were your experiences of the exam?

I am half way through the study for the routing and switching composite exam (having already passed the ARCH exam) to certify CCDP

I am a network designer by trade and was wondering whether to shelve the composite exam for the time being at least and dive straight into the CCDE track and come back to the composite later?

Whilst the configuration stuff in the composite is interesting it’s not something I do day to day. Going back to have to pass the CCNA to get CCDP was annoying enough I guess I am a least a month or two away from being ready to take the composite so should I swap straight to the CCDE track?

To me it doesn’t make much sense that CCDP is not a pre-req for CCDE?
CCDE
Written Exam
ADVDESIGN is the qualifying exam for the Cisco Certified Design Expert CCDE certification. The ADVDESIGN exam will test a candidate’s combined knowledge of routing protocols, internetworking theory and design principles .The exam assesses a candidate’s understanding of network design in the areas of routing, tunneling, Quality of Service, Management, Cost, Capacity, and Security. This exam combines in-depth technical concepts with Network Design principles and is intended for a Network Professional with at least 5 years of experience in Network Engineering or Advanced Network Design.

120 minutes

Available globally at Pearson VUE

Written Exam Blue Print
The following blueprint provides general guidelines for the content to be included on the ADVDESIGN beta exam.

Free PassGuide Practice Engine Demo Download Pass4sure offers free demos for each certification exam, including all IT vendors. You can check out the testing engine software, or pdf file question quality and usability of our practice exams before you decide to buy it. We are the only one site that offers demos for almost all IT certification exams.If you want to try p4s exam practice engine demo. http://demo.passguide.com/download

Topic
IP Routing
Explain route aggregation concepts and techniques.
Purpose of route aggregation
Scalability and fault isolation
How to Aggregate
Explain the theory and application of network topology abstraction and layering.
Layers and their purpose
Core, aggregation, distribution, access
Purpose of Link State Topology Summarization
What is the purpose of LS topology summarization (not how it works)
Use of Link State Topology Summarization
Where and how to build a flooding domain border
Explain the impact of fault isolation and resiliency on network design.
What is the impact of fault isolation on network reliability
Separating rapid and/or massive changes from the remainder of the network, how to create fault isolation
What is fate sharing, and what is it’s impact
What is the impact of redundancy on convergence times
Explain metric based traffic flow and modification.
How to engineer metrics to modify traffic flow
“MPLS vs. IGP Traffic Engineering
Modifying IGP Metrics to Engineer Traffic Flow”
Understanding Traffic Flow & Metrics
Third Party Next Hop
Impact on redistribution design
Explain fast convergence techniques and mechanisms.
Layer 2 Down Detection
For all media types
Fast hello timers
OSPF, EIGRP, IS-IS, BGP
Fast SPF Timers
OSPF, IS-IS
Recursion and Convergence
Impact of Third Party Next Hop & BGP recursion
Explain routing protocol operation.
Neighbor Relationships
OSPF, EIGRP, IS-IS, BGP
Determining Loop Free Paths
OSPF, EIGRP, IS-IS, BGP, MPLS Constrained SPF
General Operation
OSPF, EIGRP, IS-IS, BGP; How each protocol operates
Flooding Domains and Stubs
OSPF/IS-IS flooding domains, EIGRP stubs
iBGP Mesh
Next hop mechanisms in BGP, RR’s, etc.
Select lower operational costs and complexity.
Route Filters
Simple vs. complex
General
Redistribution
Simple designs, tags, route filters, etc.
Explain transport mechanisms and interaction with routing protocols.
Link Characteristics
Point-to-point, point-to-multipoint, broadcast, etc.
RP Implementation on Various Links
OSPF on each link type
IS-IS on each link type
EIGRP considerations for point-to-multipoint
Topology Characteristics
Full mesh, partial mesh, ring, etc.
RP Implementation on Various Topologies
OSPF/IS-IS flood blocking, etc.
Explain generic routing and addressing concepts.
Policy Based Routing
IPv6 Basics
Explain multicast routing concepts.
General Multicast concepts
Tunneling
Explain how tunneling affects end service applications.
Identify and select tunneling technologies appropriate to meet network design objectives.
Identify where and when tunneling parameters must be tuned to optimize the operation of end user applications.
Knowledge of issues related to Layer 2 tunneling: i.e. packet ordering, MTU, etc.
What technologies support Layer 2 and Layer 3 tunneling: L2TPv3, GRE, ATOM, IPsec, etc.
How to implement tunneling given a specific situation: i.e. tunneling Novel IPX over a Layer 3 service provider core, etc.
Understanding of issues related to tunneling L3(IP) in L2(ATM, MPLS)
Explain, recognize, and select tunneling techniques appropriate to the size and scale of the network requirements.
What is the impact of different tunneling technologies on scalability (Selection of a tunneling technology with scalability as a criteria)
How scalability is affected based on type of tunnels (point-to-point, point-to-multipoint)
Explain how L3 routing is affected by tunneling technologies and select L3 routing protocols appropriate to implement tunneling and as passenger traffic in tunnels
How L3 routing is overlaid on a given tunneling technologies
What L3 Routing Protocol would suit a given tunneling technology, topology and scalability
Explain, recognize, and select logical and physical topologies required to meet network design requirements.
What are the best points/nodes in network to initiate and terminate tunnels
Which model would fulfill the requirements (full mesh, partial mesh, hierarchical)
Explain, recognize, and select methods for interconnecting tunneling environments across one or more service provider networks.
Describe different inter-provider tunneling models (i.e. 2547, GRE, IPsec, etc.
Explain, recognize, and select methods for steering traffic with tunnels and into tunnels.
Class Based Tunnel Selection
Traffic Engineering
Explain, recognize, and select methods for providing network failover and redundancy to meet network availability requirements.
Restoration vs. Protection (IGP Fast Convergence, FRR)
Non-stop Forwarding vs. Restoration (at the IP routing layer)
Explain, recognize, and select methods for interconnecting different types of attachment media on tunnel endpoints. Recognize and explain the differences in mapping different L2 technologies onto an L3 tunneling environment.
Interworking
Mapping Layer 2 service onto Layer 3 at the edge
Explain, recognize, and select methods to manage the size and scale of broadcast domains in tunneled L2VPN environments.
VPLS scaling issues
Spanning Tree issues
Broadcast issues across various topologies
3) QoS
Measure and interpret different QoS performance metrics.
Correlate performance metrics to application performance.
Knowledge of the different QoS performance metrics: one-way delay, round-trip delay, jitter, etc.
How to measure and interpret QoS performance metrics
How QoS performance metrics relate to user applications: i.e. impact of QoS metrics on application performance, etc.
Determine why, where and how to implement traffic classification, traffic conditioning and PHB.
Explain how DiffServ QoS tools work.
What DiffServ Terminology means (DS codepoint, Meter, DS ingress/egress node, Remark, DS domain, etc.)
Where to do Traffic Classification (edge and core of DS Domain)
What is Traffic Conditioning and where is it applied? (metering, marking, shaping and policing)
What are traffic profiles and meaning of in/out of profile (Token bucket)
What is the difference between micro-flow and DS behavior aggregate (PHB)
What is the impact on non-DS-compliant nodes within a DS domain on SLAs
What is the issue with MF Classifier and Fragmentation
What is the issue with re-marking and OoO packets
What is the purpose of shapers and droppers
What are different PHB models (e.g. x% minimal resources and proportional remaining link capacity)
What are issues with Different number/type of PHBs in different part of the network
What are the benefits of MF classification on edge and DS classification in the core
Understanding Classification/conditioning/PHB on a per customer basis or few number of templates
What are ways of DS Field Mapping to PHB: 1->1 or N->1 or both
What are tools for PHB Queue management and bounding delay, jitter, packet loss (e.g. TS, WRED, WFQ,etc.)
Understanding QoS provide differentiated services only when there is contention for resources
Explain operations of RSVP.
How RSVP Application does CAC and resource reservation
Explain generic QoS requirements for common application (VoIP, Video, TCP, UDP, control plane traffic).
Explain QoS requirements for control plane traffic.
What are generic VoIP Requirements
What are generic Video Requirements
What are generic TCP Requirements
What are generic UDP Requirements
Understanding of differentiation of control traffic vs data traffic
Where and how to define marking/conditioning of Control Traffic
Explain the techniques to avoid Class starvation when multiple classes are used (EF and non-EF).
How EF with a policer and MDRR/Priority Queue solves the problem
How minimum BW assignment per class or proportional BW assignment among all classes solves the problem
What is the impact of applications’ traffic within a given queue with same DS or different DS codepoint
What is the impact of applications’ traffic riding on the same node/link in case of failure
Explain the interaction of IP DSCP with other marking schemes (IP Prec, .1P, MPLS EXP, ATM, Frame Relay).
Interaction b/w DSCP and other technologies (understanding/issues/concerns)
Ethernet
ATM
Frame Relay
MPLS
RPR
IP Prec
In case of tunneling layers of marking : Differentiation between tunnel marking and data packet marking
Explain QoS based routing (PBR).
Situations where one has to pick one or two of the following to solve a problem (and understanding of the following)
BGP QoS Propagation
MTR
OER
PBR
CBTS
Management
Analyze network conditions and behavior to determine potential degradation or failure conditions.
Recognize conditions from SHOW output for data plane, control plane, hardware, etc.
Recognize conditions from DEBUG output for data plane, control plane, hardware, etc.
Recognize conditions from network behaviors for data plane, control plane, hardware, etc.
Recognize conditions from external monitoring and reporting systems.
Explain the operation and advantages of different management access mechanisms.
How to implement out of band access to all devices in a network
What should be considered when defining secure access to routers
Recognize when and where a design will result in failure.
Explain the operation and use of network management protocols.
Differences between the versions of SNMP.
Knowledge of puts, gets, operations (read, write)
Use of SNMP in SLA management
Identify when use of CMIP is appropriate
Identify when use of TMN is appropriate
Identify network management tools and their uses.
Recognize tools used for SLA management
Identify use of Generic On-Line Diagnostics (GOLD)
Identify and Classify tools for Event Management
State rules for use of Syslog
Knowledge of where to place Netflow Collectors
Identify Services required for flow collection
Recognize Port number for Netflow
Identify services required for event correlation
Identify auditable factors in a network.
Identify auditable factors in a network
Explain traffic management concepts and actions based on traffic statistics.
What is a traffic matrix
When to upgrade a link or re-route traffic
Interpretation of historical data to predict future growth and needs
Recognize configuration management tools and best practices.
Recognize uses of templating tools
Identify best practices for configuration management (i.e. logging config changes, auditing “as running” vs “as configured,” consistent feature application, etc.)
Describe role-based configuration access.
Security
Explain the impact of security availability design in the characteristics of a network.
OOB Access
Decoupling
Paul Baran Model
Compartmentalization
Use available tools in a network security design to address identity, monitoring and correlation aspects.
SNMP
Netflow
Syslog
RMON
DNS
Radius/AAA
Full Packet Classifiers
Explain the impact of control plane design decisions on the security of a network; implement security mechanisms to protect the control plane.
Use and impact of addressing.
Use and impact of area (flooding domain/summary points) placement.
Route/Topology/Link Hiding
Adjacency Protection (MD5, GTSM, etc.)
Route Validation
Route Filtering
Routing Plan
Other routing techniques.
Explain the impact of data plane design decisions on the security of a network; implement security mechanisms to protect the data plane.
Infrastructure Protection
Policy Enforcement (QoS, BCP38)
Prepare and explain security incident preparation and response strategies in a network.
Reaction Tools (Identification and Classification)
Traceback Tools
Remotely-Triggered Black Holes (RTBH) (destination, source, rate limit, etc.)
Sink Holes
Reactive ACLs

Free down:pass4sure 352-001
Free down:testking 352-001

PassGuide provides high-quality test materials, for example, Cisco CCNA CCNP CCIE, Comptia A + NETWORK + Security +, Juniper jncia, jncis, Vmware VCP-410,certification practice exams and so on.We are committed to give full refund to candidates if they fail the exam with use of our products.And we are confident to make such a guarantee. Buy Best Practice Exam,high-quality ,100% Guarantee ,Pls contact me,Mail:Sales@passguide.com

P4S Free Downloads

Type	Exam Braindumps	New Questions & Answers	Latest Updated	Available link
	All Pass4sure's Exam Pack	858	1 days ago	Download Free Testing Engines

PassGuide Braindumps-Free Test king Help You Quick Pass Any it Certifications Exams

Click links: www.testking.la/braindumps/free/down/crack/all/testking