Pass4Sure ec0-350 ceh version 2.73 vs. correct version 1

(or just Pass4Sure verification)

http://www.certbible.org/pass4sure-ec-council-certified-ethical-hacker-exam-ec0-350-v273/

# = question number in Pass4Sure.
First letter = Pass4Sure answer
Second letter = Nimzo answer (no letter, no like question in Nimzo)

#2 – distingusihed name not found
b
a

#15 – last step of backup?
a
b

#32 – reset password of the security administrator
e

#63 – Which NGX component displays the current # of packets………reporting module?
a

#65 – multicast ‘to and through’
b
a

#70 – earlier versions on security policy w/o clearing object
b

#110 – SIC Certificates:
b
e

#127 – Phase 2 negotiations are failing
b
c

#137 – Shauna needs to uninstall the Policy, but keep the processes running
b
d

Comments? Please chime in and verify which answer you think is correct.

Thanks.

Here is what I think are the correct answers in Pass4Sure:

#2 – distinguished name not found
b

#15 – last step of backup?
b

#32 – reset password of the security administrator
a

#63 – Which NGX component displays the current # of packets
e

#65 – multicast ‘to and through’
b

#70 – earlier versions on security policy w/o clearing object
b

#110 – SIC Certificates:
e

#127 – Phase 2 negotiations are failing
b

#137 – Shauna needs to uninstall the Policy, but keep the processes running
b
——————————————————————————–

“#32 – reset password of the security administrator
a”
Agreed on 32 is Launch cpconfig and select “Administrator”
[Expert@CP]# cpconfig
This program will let you re-configure
your Check Point products configuration.

Configuration Options:
———————-
(1) Licenses
(2) Administrator
(3) GUI Clients
(4) SNMP Extension
(5) PKCS#11 Token
(6) Random Pool
(7) Certificate Authority
(8) Certificate’s Fingerprint
(9) Disable Advanced Routing
(10) Disable Check Point SecureXL
(11) Automatic start of Check Point Products

(12) Exit

Enter your choice (1-12) :2

Configuring Administrator…
============================
The following Check Point products Administrator
is defined for this SmartCenter Server
(Please note that Administrators can be defined using the SmartDashboard but they are not shown here):

weberboy (Read/Write Permission for all products; )

Do you want to modify this list (y/n) [y] ?

Do you want to delete an administrator (y/n) [y] ?
Administrator: weberboy
Administrator weberboy removed successfully

No administrator is currently defined.
Are you sure you want to continue? (y/n) [n] ?

Do you want to add an administrator (y/n) [y] ? y
Administrator name: pr0ph3t
Password:
Verify Password:

Administrator pr0ph3t was added successfully and has
Read/Write Permission for all products with Permission to Manage Administrators
+++++++++++++++
FWM does not have such option as reset the P/W.

[Expert@CP]# fwm -h
Usage:
fwm ver [-f] … # Display version
fwm load [opts] [filter-file|rule-base] targets # Install Policy on targets
fwm unload [opts] targets # Uninstall targets
fwm dbload [targets] # Download the database
fwm logexport [-h] … # Export log to ascii file
fwm gen [-RouterType [-import]] rule-base # Generate an inspection
# script or a router access-list
fwm dbexport [-h] … # Export the database
fwm ikecrypt <key> <password> # Crypt a secret with a key
# (for the dbexport command)
fwm dbimport [-h] … # Import to database
fwm kill [-sig_no] procname # Kill firewall process
fwm lock_admin [-h] . # Manage locked out Administrators

#15 Final step NGX backup
b is correct!
Move *.tgz file to another location.
#63 – Which NGX component displays the current # of packets
e
http://www.checkpoint.com/support/te…ule_ng_sp0.pdf

they did not ask for SmartConsole Application/Tool but “NGX Component” and there is some difference.

Thus I would say “A” is correct.
#70 – earlier versions on security policy w/o clearing object
b

I would say it is “E” DataBase Revision Control
SmartDashBoard/File/DB Revision Control. and you can restore what you have created earlier.

#110 – SIC Certificates:
b
e
I would say that it is B (during the installation) but ActualTests say it is E
It is just a bit tricky.
#127 – Phase 2 negotiations are failing
b
c
I would use Monitor to do that.
U go to SV Monitor/Tunnels/Permanent Tunnels/GW/ State so it is definitely wrong here.

#137 – Shauna needs to uninstall the Policy, but keep the processes running
b
d
D – is correct. AS it is not mentioned about 10.x.x.x in the question.

So what do you think weberboy?

Free Pass4sure Practice Engine Demo Download Pass4sure offers free demos for each certification exam, including all IT vendors. You can check out the testing engine software, or pdf file question quality and usability of our practice exams before you decide to buy it. We are the only one site that offers demos for almost all IT certification exams.If you want to try p4s exam practice engine demo. www.pass4sure.org.cn/braindumps/download/p4s/iengine/ www.pass4sure.org.cn/free_testking/download/demo/pdf

(12) Exit

Enter your choice (1-12) :2

Why I don’t have this entry “Administrator” from cpconfig on my firewall????
because I must change the password and I don’t know where can I do it. I think was there (.
The platform is Red Hat.
Thanks for your help.

Hi MONIQUE,

You did not mention what Platform you are using and saying Red Hat – means nothing to me unless you specify what the

Secure Platform you are running on.
You can see bellow how to obtain this information.
I am using CheckPoint_NGX_R65_P-1_SPLAT_Linux30 any way if you in testing environment and you have this one, which I

recomend, it takes only 10 minutes to install and configure the access and it is accentual for Exam/real world to

understand how to do it without manuals.

[Expert@CP]# fw ver
This is Check Point VPN-1(TM) & FireWall-1(R) NGX (R65) – Build 430
[Expert@CP]# uname -a
Linux CP 2.4.21-21cp #1 Sun Feb 11 15:56:58 IST 2007 i686 i686 i386 GNU/Linux
[Expert@CP]# fwm ver
This is Check Point SmartCenter Server NGX (R65) – Build 083
Installed Plug-ins: Connectra NGX R62CM

You can reset Admin p/w from the webGUI
https://managementIP/ – can be configured from expert mode “sysconfig”
Then once u there/
Secure Platform/Product Configuration/Administrators/drill into admin/new p/w

Please let me know if I have answered you questions.
Regards,
pr0ph3t

Hi MONIQUE,You did not mention what Platform you are using and saying Red Hat – means nothing to me unless you

specify what the Secure Platform you are running on.
You can see bellow how to obtain this information.
I am using CheckPoint_NGX_R65_P-1_SPLAT_Linux30 any way if you in testing environment and you have this one, which I

recomend, it takes only 10 minutes to install and configure the access and it is accentual for Exam/real world to

understand how to do it without manuals.[Expert@CP]# fw ver
This is Check Point VPN-1(TM) & FireWall-1(R) NGX (R65) – Build 430
[Expert@CP]# uname -a
Linux CP 2.4.21-21cp #1 Sun Feb 11 15:56:58 IST 2007 i686 i686 i386 GNU/Linux
[Expert@CP]# fwm ver
This is Check Point SmartCenter Server NGX (R65) – Build 083
Installed Plug-ins: Connectra NGX R62CM

you questions.
Regards,
pr0ph3tHI,
Ok so:
fw ver:
This is Check Point VPN-1(TM) & FireWall-1(R) NG with Application Intelligence (R55) HFA_14, Hotfix 463 – Build 008

fwm ver:This is not a SmartCenter server station

uname -a:Linux FW_CCU_RM1 2.4.18-5smp #1 SMP Mon Jun 10 15:19:40 EDT 2002 i686 unknown

Ps The SmartCenter Server have the ssh disable and I cannot reache it.
Because the management is shared with another group that is situated in another part. So I think that I can’t

change the administrator’s password. Insn’t it?

Another thing: You say:
You can reset Admin p/w from the webGUI
https://managementIP/ – can be configured from expert mode “sysconfig”

If you remember all the questions/answers in pass4sure, you will pass. 5% of the answers are wrong for a reason,

they are not wanting people to get 100%.

Here are possible answers to pass4sure. You make up your own mind.

#2 – distinguished name not found
D (Nimzo/Actualtests)
A (Testking/Actualtests) Question appears twice in both testking and actualtests (Q23 & Q128)
B (I believe this is correct, that’s I belive after looking at the handbook)
Testkings actually states “The first place that is queried is the internal users database”

#15 – last step of backup?
B (Nimzo/Actualtests)

#32 – reset password of the security administrator
A (I think is this case is would be ‘A’)
C (It may be ‘C’ in the exam. I think the cpunload may be a typo)

Lauch cpconfig and delete the Administrator’s account. Recreate the account with the same name. (Nimzo/Actualtest)

#63 – Which NGX component displays the current # of packets
E (Nimzo/Actualtests)

#65 – multicast ‘to and through’
C (Nimzo/Actualtests)
“Multicast groups are configured improperly on the external interface properties of the security Gateway object”

#70 – earlier versions on security policy w/o clearing object
B (100% Correct)

#75 – which encryption scheme provides “In-place” encryption
C (Nimzo/Actualtests/Handbook)
Only options here are either DES or AES( AES Used maily by the U.S. Government to protect unclassified information)

#110 – SIC Certificates:
E (Nimzo/Actualtests)

#121 – authentication using SecureClient
B (Nimzo/Actualtests)

#127 – Phase 2 negotiations are failing
C (Nimzo/Actualtests(

#137 – Shauna needs to uninstall the Policy, but keep the processes running
D (Nimzo/Actualtests)
10.1.1.5 has nothing to do with answer.

P4S Free Downloads

Type	Exam Braindumps	New Questions & Answers	Latest Updated	Available link
	All Pass4sure's Exam Pack	858	1 days ago	Download Free Testing Engines