pass4sure microsoft ts 70-571 v2.93

TS:Microsoft Windows Embedded CE 6.0. Developing : 70-571 Exam
Product DescriptionExam Number/Code: 70-571
Exam Name: TS:Microsoft Windows Embedded CE 6.0. Developing

“TS:Microsoft Windows Embedded CE 6.0. Developing”, also known as 70-571 exam, is a Microsoft certification. With the complete collection of questions and answers, Pass4sure has assembled to take you through 41 Q&As to your 70-571 Exam preparation. In the 70-571 exam resources, you will cover every field and category in TS helping to ready you for your successful Microsoft Certification.
Exam news
The Technology Specialist (TS) Exam 70-571: Windows Embedded CE 6.0 Development was released in May 2008. This exam is available in English, French, German, Japanese, Chinese (Simplified), and Korean.

Audience profile
Candidates for this exam have two to three years of experience in an embedded system environment developing for embedded devices by using Windows Embedded CE. Candidates should also have at least one year of experience using Windows Embedded CE and six months of experience using Windows Embedded CE 6.0. Candidates usually fill the role of embedded developer, embedded engineer, device driver developer, board support package engineering developer, field application engineer, and quality assurance engineer. Candidates typically develop, implement, test, and support embedded devices.

In addition, candidates should have a good understanding of Microsoft Visual Studio 2005 with Platform Builder, C, and C++.

Credit toward certification
Exam 70-571: TS: Windows Embedded CE 6.0 Development counts as credit toward the following certification:

• Microsoft Certified Technology Specialist (MCTS): Windows Embedded CE 6.0

Preparation tools and resources
To help you prepare for this exam, Microsoft Learning recommends that you have hands-on experience using the product and that you use the following training resources. These training resources do not necessarily cover all of the topics listed in the “Skills measured” section.

Classroom training Microsoft E-Learning Microsoft Press books Practice tests
Find a Windows Embedded CE Training Partner
There is no Microsoft E-Learning training currently available.
Programming Windows Embedded CE 6.0 Developer Reference, Fourth Edition
(ISBN: 9780735624177)

Japanese: Windows Embedded CE 6.0 Developer – Embedded OS Development
(Amazon.co.jp)
(ISBN: 9784891005665)

Windows Embedded CE 6.0 Fundamentals
(ISBN: 9780735626256)

Russian: Introduction to Windows Embedded CE 6.0
(msembedded.ru)
There are no practice tests currently available.

Microsoft online resources
• Preparation Kit: This free, downloadable resource helps you prepare for your certification exam with self-paced lessons and reviews that cover each exam objective.

• Product information: Visit the Windows Embedded CE Web site for detailed technology information.

• MSDN Windows Embedded Developer Center: Designed for developers, the Microsoft Developer Network (MSDN) features code samples, technical articles, downloads, newsgroups, and chats.

• Official training partner: Find an official training partner for Windows Embedded CE.

Skills measured
This exam measures your ability to accomplish the technical tasks listed in the following table. The percentages indicate the relative weight of each major topic area on the exam.

Skills measured by Exam 70-571
Customizing the Operating System Design (12 percent)
Configure the operating system (OS) design.

May include but is not limited to: Create initial OS design for given board support package (BSP)/hardware; set the environment variables, build options, and regional settings; manage multiple configurations (for example, release/debug); identify appropriate catalog items; modify a build configuration to add a new catalog item to OS design

Configure Windows Embedded CE projects.

Clone a component.

Generate a software development kit (SDK).

May include but is not limited to: Create an SDK; configure an SDK; build an SDK

Manage catalog items.

May include but is not limited to: Integrate an existing driver into a Windows Embedded CE development environment; create a catalog item; verify and correct contents of a catalog file

Building and Deploying the Runtime Image (9 percent)
Build the runtime image.

May include but is not limited to: Build from the IDE; build from the command line

Analyze build results.

May include but is not limited to: Interpret build failures; check build status; identify hidden failures (those not identified by IDE as build failures)

Deploy the runtime image to target hardware.

May include but is not limited to: Configure Platform Builder options; download operating system to the target hardware; connect to a target hardware

Performing System Programming (22 percent)
Monitor and optimize system performance.

Implement system applications.

May include but is not limited to: Implement control panel applet; launch a custom shell

Implement threads and thread synchronization.

Implement exception handling.

Implement power management at the system level.

May include but is not limited to: Application-level power management; power management scheme; Power Manager configuration

Debugging and Testing the System (17 percent)
Detect software-related errors.

May include but is not limited to: Detect driver memory leaks; detect deadlocks; detect race conditions

Configure the runtime image to enable debugging.

May include but is not limited to: Entire image or individual module; enable profiling in the OEM Abstraction Layer (OAL)

Test a system by using Windows Embedded CE 6.0 Test Kit (CETK).

May include but is not limited to: Use existing CETK tests, including Stress test; create custom tests

Test a boot loader.

Customizing a Board Support Package (BSP)(17 percent)
Configure a BSP.

May include but is not limited to: Modify parameter files (bib, reg, dat files); modify build files

Add power management support to an OEM Abstraction Layer (OAL).

Configure memory mapping of a BSP.

Implement a boot loader from existing libraries.

Share driver resources between hardware and an OAL.

May include but is not limited to: Shared memory; shared interrupts; shared I/O

Developing Device Drivers (23 percent)
Marshall data across boundaries.

May include but is not limited to: Implement a data exchange mechanism between a driver and an application; implement communication between drivers and hardware; load a driver

Implement an interrupt mechanism in a device driver.

May include but is not limited to: Implement an interrupt service thread (IST); communication between interrupt service routine (ISR) and IST; IRQ vs. SYSINTR; Installable ISR

Implement a stream interface driver.

Enhance driver portability.

May include but is not limited to: Package should be hardware-target independent; BUS-agnostic hardware access

Free PassGuide Practice Engine Demo Download Pass4sure offers free demos for each certification exam, including all IT vendors. You can check out the testing engine software, or pdf file question quality and usability of our practice exams before you decide to buy it. We are the only one site that offers demos for almost all IT certification exams.If you want to try p4s exam practice engine demo. http://demo.passguide.com/download

QUESTION 1:
You configure an HP Jet Direct print device as shown in the
Network Diagram exhibit.
070-215
Actualtests.com – The Power of Knowing
You want to create and share a printer at Srv2.sales.justtogs.com that is connected
to the TCP/IP port of the print device. However, when you enter the IP address of
the device, you receive the dialog box shown in the PrinterPortWizard exhibit.
PrinterPortWizard
What should you do?
A. Select Hewlett Packard JetDirect from the Standard drop-down list.
B. Select the Custom option button, click the Settings command button, and select the
LPR protocol.
C. Change the IP address of the print device to 10.5.20.200.
D. Change the subnet mask of the print device to 255.0.0.0.
E. Change the default gateway address on Srv2.sales.justtogs.com to 10.5.20.100.
Answer: C
070-215
Actualtests.com – The Power of Knowing
Explanation:
The IP address of the printer, 10.4.20.100/16, is not on the same subnet as the
default gateway, 10.5.20.100/16, or Srv1, 10.5.20.50/16. Changing the IP address to
10.5.20.200 would make communication with the printer possible.
Incorrect answers:
A: It is not necessary to specify the vendor type for the printer. The IP address of the
printer is incorrect.
B: The LPR protocol is used in mixed environments, which includes UNIX machines.
D: The 16-bit subnet mask of the print device is correct therefore we do not need to
change its subnet mask.
Reference:
Microsoft Corporation, Self-Paced MCSE Training Kit: Microsoft Windows 2000 Server,
Microsoft Press, Redmond, 2000, Chapter 8, Lessons 2-5
QUESTION 2:
You are the network administrator for Certkiller .com. You configure a shared
printer on a Windows 2000 Server computer. The printer connects to a Hewlett
Packard JetDirect print device that uses DLC. This print device is on the same
network segment as the server.
Six months later, you relocate the print device to a different network segment. Users
report that they are able to send print jobs to the printer but that their print jobs no
longer print.
You need to ensure that the printer and the print device are working properly.
What should you do?
A. Configure the JetDirect print device to use DHCP.
B. Uninstall and reinstall the DLC protocol from the server.
C. Configure the printer and the JetDirect print device to use the LPR printing protocol.
D. Delete the printer. Re-create the printer by using DLC to connect to the JetDirect print
device.
Answer: D
Explanation: In this scenario the DLC protocol has to be configured on the Printer.
The print device was in use on a different network segment, but the computer that
serves as a print server must be on the same segment as the printer device because
DLC is not routable.
Incorrect answers:
A: This print device uses DLC, not TCP/IP therefore it does not require DHCP to provide
it with an IP address.
B: The server will no longer be functioning as a print server; therefore we should not
reinstall the DLC protocol on the server.
C: The LPR printing protocol is used in UNIX environments.
Reference:
070-215
Actualtests.com – The Power of Knowing
Microsoft Corporation, Self-Paced MCSE Training Kit: Microsoft Windows 2000 Server,
Microsoft Press, Redmond, 2000, Chapter 8, Lessons 2-5
QUESTION 3:
You are the administrator of the homeoffice.local domain.You
want to create a shared printer for the company’s executives so that they do not
have to wait for their documents to print when the default printer’s queue contains
a large number of documents.
You configure the new high-priority printer and want to set permissions for the
groups shown in the exhibit. Note: The default settings have been cleared.
You select the check box to allow Print permission for the Executives group. You
want only the Administrators, Print Operators, Server Operators, and Executives
group to be able to print to the printer. What can you do? (Select all that apply).
A. Remove the Everyone group.
B. Select the check box to deny Print permission for the Everyone group.
C. Select the check box to deny Manage Documents permission for Everyone group.
D. Select all Deny check boxes for the Everyone group.
E. Clear all check boxes for Everyone group.
Answer: A, E
070-215
Actualtests.com – The Power of Knowing
Explanation: By default the Everyone group, to which all users are automatically
added, has access to printer. Therefore, by removing the Everyone group, only the
groups that have been explicitly been given permission to the printer would be able
to use the printer. The same could be achieved by removing all permissions from the
Everyone group.
Incorrect answers:
B: When a user has conflicting permissions to network resources as a result to his or
her membership to one or more groups, the most restrictive permission is applied.
However, a deny permission overrides all other permissions. All users are
automatically added to the Everyone group therefore the deny print permission applied to
the Everyone group will be inherited by all users and would override their other
permissions to the printer. All users would then not be able to print.
C: When a user has conflicting permissions to network resources as a result to his or her
membership to one or more groups, the most restrictive permission is applied. However,
a deny permission overrides all other permissions. All users are automatically added to
the Everyone group therefore the deny manage documents permission applied to the
Everyone group will be inherited by all users and would override their other manage
documents permissions to the printer. This will however not prevent all users from be
able to use the printer.
D: When a user has conflicting permissions to network resources as a result to his or her
membership to one or more groups, the most restrictive permission is applied. However,
a deny permission overrides all other permissions. All users are automatically added to
the Everyone group therefore the deny permissions are applied to the Everyone group
will be inherited by all users and would override their other permissions to the printer.
All users would then not have access to the printer.
Reference:
Microsoft Corporation, Self-Paced MCSE Training Kit: Microsoft Windows 2000 Server,
Microsoft Press, Redmond, 2000, Chapter 8, Lessons 2-5
pass4sure 70-571

Questions and Answers : 41 Q&As Expected Date: October 23rd , 2008 Price: $125.99 $89.99 Pre-Buy price: $62.99 Save $27

Free download:pass4sure microsoft ts 70-571 v2.93
Free download:testking microsoft ts 70-571 v2.93

PassGuide provides high-quality test materials, for example, Cisco CCNA CCNP CCIE, Comptia A + NETWORK + Security +, Juniper jncia, jncis, Vmware VCP-410,certification practice exams and so on.We are committed to give full refund to candidates if they fail the exam with use of our products.And we are confident to make such a guarantee. Buy Best Practice Exam,high-quality ,100% Guarantee ,Pls contact me,Mail:Sales@passguide.com

P4S Free Downloads

Type	Exam Braindumps	New Questions & Answers	Latest Updated	Available link
	All Pass4sure's Exam Pack	858	1 days ago	Download Free Testing Engines